Various Multiple Criteria Decision-Making (MCDM) techniques in one book: 13 MCDM techniques have been applied, namely, WSM, WPM, WASPAS, GRA, SMART, CRITIC, ENTROPY, EDAS, MOORA, AHP, TOPSIS, VIKOR, and new tools: MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. To date, no other book possesses this many tools. Various quantitative techniques: Different quantitative techniques have been applied, namely, Cronbach alpha, Chi-square and ANOVA (for demographic analysis), Percent Point Score and Central Tendency (response analysis), Factor Analysis, Correlation and Regression. To date, no other book possesses this many tools. Interpretive Structural Modelling: ISM has been applied for verifying MCDM results through MICMAC analysis and ISM model thus paving the way for model through SEM. Structural Equation Modelling: SEM using AMOS in PASW has been applied for model development. New MCDM techniques developed: In the process during qualitative analysis, new tools have been developed and their results have been compared with other existing MCDM tools and the results are encouraging. The new techniques are MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. Qualitative Model Developed: As the title says, Sustainable Green Development and Manufacturing Performance through Modern Production Techniques. It is a need-of-the-hour topic, as industries must maintain their performance (sustainable development) and, while sustaining, they have to keep in mind green issues (that is, environment-related issues, especially during the COVID-19 pandemic) and adopt advanced manufacturing and maintenance techniques. A model for this has been developed which will be helpful to both academicians and industrialists. Real-time Case Studies: Case studies in two industries of differing origins, different manufacturing sectors, different products, and comparing their units in the country of their origin and India. Dr. Chandan Deep Singh is an assistant professor in the Department of Mechanical Engineering, Punjabi University, Patiala, Punjab (India). He is a co-author of Adolescents, Family and Consumer Behaviour (Routledge, 2020) and of Manufacturing Competency and Strategic Success in the Automobile Industry (CRC Press, 2019). Dr. Harleen Kaur is a manager (HR) at DELBREC Industries, Pvt. Ltd., Chandigarh. She co-authored Adolescents, Family and Consumer Behaviour (Routledge, 2020).

Various Multiple Criteria Decision-Making (MCDM) techniques in one book: 13 MCDM techniques have been applied, namely, WSM, WPM, WASPAS, GRA, SMART, CRITIC, ENTROPY, EDAS, MOORA, AHP, TOPSIS, VIKOR, and new tools: MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. To date, no other book possesses this many tools. Various quantitative techniques: Different quantitative techniques have been applied, namely, Cronbach alpha, Chi-square and ANOVA (for demographic analysis), Percent Point Score and Central Tendency (response analysis), Factor Analysis, Correlation and Regression. To date, no other book possesses this many tools. Interpretive Structural Modelling: ISM has been applied for verifying MCDM results through MICMAC analysis and ISM model thus paving the way for model through SEM. Structural Equation Modelling: SEM using AMOS in PASW has been applied for model development. New MCDM techniques developed: In the process during qualitative analysis, new tools have been developed and their results have been compared with other existing MCDM tools and the results are encouraging. The new techniques are MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. Qualitative Model Developed: As the title says, Sustainable Green Development and Manufacturing Performance through Modern Production Techniques. It is a need-of-the-hour topic, as industries must maintain their performance (sustainable development) and, while sustaining, they have to keep in mind green issues (that is, environment-related issues, especially during the COVID-19 pandemic) and adopt advanced manufacturing and maintenance techniques. A model for this has been developed which will be helpful to both academicians and industrialists. Real-time Case Studies: Case studies in two industries of differing origins, different manufacturing sectors, different products, and comparing their units in the country of their origin and India. Dr. Chandan Deep Singh is an assistant professor in the Department of Mechanical Engineering, Punjabi University, Patiala, Punjab (India). He is a co-author of Adolescents, Family and Consumer Behaviour (Routledge, 2020) and of Manufacturing Competency and Strategic Success in the Automobile Industry (CRC Press, 2019). Dr. Harleen Kaur is a manager (HR) at DELBREC Industries, Pvt. Ltd., Chandigarh. She co-authored Adolescents, Family and Consumer Behaviour (Routledge, 2020).

Non-renewable materials can no longer be disposed once humankind's ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment. The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies. The conference will focus on 7 areas: Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes

This dissertation approaches the question of sustainability and its influence on company performance, with special focus on the manufacturing industry. In the contemporary production environment, manufacturing operations must take into account not only profit, but also environmental and social performance, in order to ensure the long-term development of the company. Companies have to decide whether they should allocate resources to environmental and social practices in order to improve their competitive advantage. Consequently, in decision-making processes concerning operations, it is important for companies to understand how to coordinate profit, people, and planet. The objective of this dissertation was to investigate the current situation regarding manufacturers’ sustainable initiatives, and to explore the relationship between these sustainable practices and companies’ performance, including financial performance, operational performance, innovation performance, environmental performance, and social performance. First of all, a structured literature review was conducted to identify sustainable factors considered to be important in the decision making of manufacturing operations. The findings were synthesized into a conceptual model, which was then adopted as the basis for designing the survey instrument used in this dissertation. Drawing on Global Reporting Initiative (GRI) reports, empirical research was performed to explore the relationship between environmental management practices and company performance. Interestingly, the findings showed that many environmental management practices had a strong positive impact on innovation performance. Sustainability disclosures and financial performance were further analyzed using extended data from the GRI reports. The results also showed that several sustainability performance indicators, such as product responsibility, human rights, and society, displayed a significant and positive correlation with return on equity in the sample companies. In order to further explore the research area and to verify these findings, a triangulation approach was adopted and new data were collected via a survey conducted among middle and large sample companies in the Swedish manufacturing industry. The results indicated that the sustainable improvement practices had a positive impact on company performance. Some environmental and social improvement practices had a direct and positive correlation with product and process innovation. Furthermore, findings suggested that better cooperation with suppliers on environmental work could help to strengthen the organizational green capabilities of the focal companies. When considering the company’s general approach to implementing sustainable practices, some interesting findings emerged. There were limited significant differences in sustainable practices when comparing different manufacturing sectors, and different countries and regions. However, the results showed that Swedish manufacturing companies often place higher priority on implementing economic and environmental sustainability practices than on social ones. This dissertation contributes to the literature on manufacturing sustainability. The study expands the understanding of how environmental, social, or economic perspectives as a triple bottom line can influence company performance and to a certain extent the supply chain. Identifying and understanding such relationships gives companies the opportunity to integrate sustainability into their manufacturing operations strategy in order to sustain their manufacturing operations over the long term.

This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.

Green Manufacturing: Fundamentals and Applications introduces the basic definitions and issues surrounding green manufacturing at the process,machine and system (including supply chain) levels. It also shows, by way of several examples from different industry sectors, the potential for substantial improvement and the paths to achieve the improvement. Additionally, this book discusses regulatory and government motivations for green manufacturing and outlines the path for making manufacturing more green as well as making production more sustainable. This book also: Discusses new engineering approaches for manufacturing and provides a path from traditional manufacturing to green manufacturing Addresses regulatory and economic issues surrounding green manufacturing Details new supply chains that need to be in place before going green Includes state-of-the-art case studies in the areas of automotive, semiconductor and medical areas as well as in the supply chain and packaging areas

This book provides the recent advances on green manufacturing processes and systems for modern industry. Chapter 1 provides information on sustainable manufacturing through environmentally-friendly machining. Chapter 2 is dedicated to environmentally-friendly machining: vegetable based cutting fluids. Chapter 3 describes environmental-friendly joining of tubes. Chapter 4 contains information on concepts, methods and strategies for zero-waste in manufacturing. Finally, chapter 5 is dedicated to the application of hybrid MCDM approach for selecting the best tyre recycling process. This book serves as a research book for students at final undergraduate engineering course or at postgraduate level. It is a reference for professionals in industries related to manufacturing and new green jobs (green products, renewable energy, green services and environmental conservation).

This book highlights innovative solutions together with various techniques and methods that can help support the manufacturing sector to excel in economic, social, and environmental terms in networked business environments. The book also furthers understanding of sustainable manufacturing from the perspective of value creation in manufacturing networks, by capitalizing on the outcomes of the European ‘Sustainable Value Creation in Manufacturing Networks’ project. New dynamics and uncertainties in modern markets call for innovative solutions in the global manufacturing sector. While the manufacturing sector is traditionally driven by technology, it also requires other managerial and organizational solutions in terms of network governance, business models, sustainable solution development for products and services, performance management portals, etc., which can provide major competitive advantages for companies. At the same time, the manufacturing industry is subject to a change process, where business networks play a major role in value-creating processes. By far the biggest challenge in this context is making value creation a sustainable process where economic, social, and environmental demands are met. Managing product and service-related business operations in manufacturing networks thus brings different challenges that cannot purely be resolved using traditional methods, and techniques. This book is an outcome of a European project funded by the European Commission, and performed by a dedicated R&D consortium comprised of some leading Research institutions and Industrial partners.

Design and Manufacture for Sustainable Development brings together a collection of papers from a conference held at the University of Liverpool in June 2002 that inspire the interchange of ideas on the theory, technology, tools, and methodology for the entire product life cycle within the framework of sustainable development. It also embraces key subjects including strategy, design, materials, manufacturing, packaging, distribution, disposal, recycling, and auditing. TOPICS COVERED INCLUDE: Philosophy of, and strategy for, sustainable technologies Design principles for sustainable development Sustainable manufacturing technologies Use of recycling/bio-degradable materials Re-use and recycling design and technologies Tools for sustainable product design Measurement and auditing Best practices and case studies Impact of emerging legislation International trends and future development. Sustainable development will have a fundamental impact on the engineering community since, through design and manufacture, we are responsible for the use of energy, materials, and processes for the complete product life cycle. This is an essential volume for the bookshelves of those wanting to be well informed about this evolving technology.

The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, and adhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.