Synthetic Polymeric Membranes for Advanced Water Treatment, Gas Separation, and Energy Sustainability is a cutting-edge guide that focuses on advanced water treatment applications, covering oily wastewater treatment, desalination, removal of dyes and pigments, photodegradation of organic hazardous materials, heavy metal removal, removal and recovery of nutrients, and volatile organic compounds. Other sections examine the area of gas separation, including acidic gas removal, oxygen enrichment, gas and vapor separation, hydrogen separation, and gas sensing. Final sections cover applications for sustainable energy usage, including the use of synthetic polymer membranes in proton exchange membrane fuel cells (PEMFCs), and more. This is a highly valuable guide for researchers, scientists, and advanced students, working with polymer membranes and films, and across polymer science, polymer chemistry, materials science, chemical e - Explains the design, preparation and characterization of synthetic polymer-based membranes for advanced applications - Provides a clear picture of the state-of-the-art in the field, including novel fabrication approaches and the latest advances in physico-chemical characterizations - Supports the development and implementation of innovative, sustainable solutions to water treatment, gas separation and energy devices

Polymeric Membrane Formation by Phase Inversion brings together for the first time analysis of all the four main phase inversion techniques. Effective parameters in each technique are covered together with the methodologies needed to prepare advanced membranes for specific separations in both liquid and gas phases. Roll-to-roll casting, spinning hollow fiber, and electrospinning nanofibers are presented, along with an analysis of the impact of solvent toxicity, membrane production, and the source of raw materials on the environment. Describing a road map for designing different morphological characteristics to prepare specific membranes for special applications, the merits and disadvantages of each method are thoroughly explored and outlined along with the sustainability, scalability and economic perspectives of membrane formation. Providing easy reference for academic and industry professionals working in membrane engineering this is an essential resource. - Analyzes membrane formation by phase inversion and modeling - Includes state-of-the-art membrane formation methods and related characterization techniques - Discusses solvent toxicity and sustainability issues of membrane production

Challenges and Recent Advances in Sustainable Oil and Gas Recovery and Transportation delivers a critical tool for today's petroleum and reservoir engineers to learn the latest research in EOR and solutions toward more SDG-supported practices. Packed with methods and case studies, the reference starts with the latest advances such as EOR with polymers and EOR with CCS. Advances in shale recovery and methane production are also covered before layering on sustainability methods on critical topics such as oilfield produced water. Supported by a diverse group of contributors, this book gives engineers a go-to source for the future of oil and gas. The oil and gas industry are utilizing enhanced oil recovery (EOR) methods frequently, but the industry is also tasked with making more sustainable decisions in their future operations. - Provides the latest advances in enhanced oil recovery (EOR), including EOR with polymers, EOR with carbon capture and sequestration (CCS), and hybrid EOR approaches - Teaches options in recovery and transport, such as shale recovery and methane production from gas hydrate reservoirs - Includes sustainability methods such as biological souring and oil field produced water solutions

Advancements in Polymer-Based Membranes for Water Remediation describes the advanced membrane science and engineering behind the separation processes within the domain of polymer-based membrane systems in water remediation. Emphasis has been put on several aspects, ranging from fundamental concepts to the commercialization of pressure and potential driven membranes, updated with the latest technological progresses, and relevant polymer materials and application potential towards water treatment systems. Also included in this book are advances in polymers for membrane application in reverse osmosis, nanofiltration, ultrafiltration, microfiltration, forward osmosis, and polymeric ion-exchange membranes for electrodialysis and capacitive deionization. With its critical analyzes and opinions from experts around the world, this book will garner considerable interest among actual users, i.e., scientists, engineers, industrialists, entrepreneurs and students. - Evaluates water remediation using pressure driven and potential driven membrane processes - Reviews emerging polymer systems for membranes preparation - Offers a comprehensive analysis in the development of polymer-based membranes and their applications in water remediation - Analyzes membrane performance parameters to evaluate separation efficiency for various water pollutants - Covers concept-to-commercialization aspects of polymer-based membranes in terms of water purification, pollutant removal, stability and scalability

Progresses in Ammonia: Science, Technology and Membranes: Production and Separation covers the production and separation of ammonia. The book includes various kind of membranes (such as composite and membrane based systems, ceramic membrane cells, oxygen conducting membrane), membrane systems (such as membrane reactors, membrane distillation, immobilized cyanobacteria in membranes, using hydrophobic membranes, fuel cell technology, electrode membrane, etc.). - Describes membrane-based approaches for producing ammonia - Introduces novel applications of ammonia combined with membranes, such as fuel cells and electrode membranes - Explores the role of membranes in ammonia recovery

Advances in Oil-Water Separation: A Complete Guide for Physical, Chemical, and Biochemical Processes discusses a broad variety of chemical, physical and biochemical processes, including skimming, membrane separation, adsorption, onsite chemical reactions, burning and usage of suitable microbial strains for onsite degradation of oil. It critically reviews all current developments in oil-water separation processes and technologies, identifies gaps and illuminates the scope for future research and development in the field. This book provides researchers, engineers and environmental professionals working in oil recovery and storage with solutions for disposal of waste oil and separation of oil from water in a sustainable, environmentally-friendly way. As the book provides a complete state-of-art overview on oil-water separation technologies, it will also ease literature searches on oil-water separation technologies. - Provides a comprehensive overview of state-of-the-art developments in oil-water separation methods - Discusses the pros and cons of established processes - Guides the reader towards the selection of the right technique/process for each oil-water separation problem - Presents current developments on adsorbent based oil-water separation

PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. - Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications - Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters - Presents state-of-the-art PEMFC research alongside the underlying concepts

Membrane materials allow for the selective separation of gas and vapour and for ion transport. Materials research and development continues to drive improvements in the design, manufacture and integration of membrane technologies as critical components in both sustainable energy and clean industry applications. Membrane utilisation offers process simplification and intensification in industry, providing low-cost, and efficient and reliable operation, and contributing towards emissions reductions and energy security. Advanced membrane science and technology for sustainable energy and environmental applications presents a comprehensive review of membrane utilisation and integration within energy and environmental industries.Part one introduces the topic of membrane science and engineering, from the fundamentals of membrane processes and separation to membrane characterization and economic analysis. Part two focuses on membrane utilisation for carbon dioxide (CO2) capture in coal and gas power plants, including pre- and post-combustion and oxygen transport technologies. Part three reviews membranes for the petrochemical industry, with chapters covering hydrocarbon fuel, natural gas and synthesis gas processing, as well as advanced biofuels production. Part four covers membranes for alternative energy applications and energy storage, such as membrane technology for redox and lithium batteries, fuel cells and hydrogen production. Finally, part five discusses membranes utilisation in industrial and environmental applications, including microfiltration, ultrafiltration, and forward osmosis, as well as water, wastewater and nuclear power applications.With its distinguished editors and team of expert contributors, Advanced membrane science and technology for sustainable energy and environmental applications is an essential reference for membrane and materials engineers and manufacturers, as well as researchers and academics interested in this field. - Presents a comprehensive review of membrane science and technology, focusing on developments and applications in sustainable energy and clean-industry - Discusses the fundamentals of membrane processes and separation and membrane characterization and economic analysis - Addresses the key issues of membrane utilisation in coal and gas power plants and the petrochemical industry, the use of membranes for alternative energy applications and membrane utilisation in industrial and environmental applications

This book covers the basic and sustainable approach of nanofiltration membrane techniques along with their fabrication, characterization, separation mechanisms, and broad applications in the field of wastewater treatment. It provides a wide knowledge of nanofiltration technique to water purification audience concerning the recent development with various illustrations, methods and results for graduate students, scientists, academicians, researchers, and industrialists. Readers from wastewater and water purification will have a quick reference by exploring the research literature on the subject field with commercial value-added research applications of nanofiltration membrane.

This book discusses problems, challenges, and mitigation strategies in the wake of environmental degradation. It suggests proactive solutions to problems of environmental degradation for strategic planning as well as their effective delivery, and problems arising due to growth in population, industry, and land use change. The uniqueness of the book is its broader spectrum of coverage with related interconnections and interdependence of various aspects. Presenting a wide spectrum of viewpoints and approaches, the book covers topics, such as deforestation impacts (land use and land cover, soil erosion); impacts on climate change and human health; treatment of industrial, municipal, biological waste disposal and their impacts on soil, water, and air; recovery/remediation processes and technologies; impacts of pesticides and chemical fertilizers on soil degradation and groundwater; socio-economic environmental sustainability; and socio-economic health impacts. Particular focus is placed on strategic planning and methodological handling of environmental degradation and remediation through various processes and treatment technologies. This book will be useful to researchers, professionals, policy makers, and environmental engineers.