IS THE TOPIC ANALOG TESTING AND DIAGNOSIS TIMELY? Yes, indeed it is. Testing and Diagnosis is an important topic and fulfills a vital need for the electronic industry. The testing and diagnosis of digital electronic circuits has been successfuIly developed to the point that it can be automated. Unfortu nately, its development for analog electronic circuits is still in its Stone Age. The engineer's intuition is still the most powerful tool used in the industry! There are two reasons for this. One is that there has been no pressing need from the industry. Analog circuits are usuaIly small in size. Sometimes, the engineer's experience and intuition are sufficient to fulfill the need. The other reason is that there are no breakthrough results from academic re search to provide the industry with critical ideas to develop tools. This is not because of a lack of effort. Both academic and industrial research groups have made major efforts to look into this problem. Unfortunately, the prob lem for analog circuits is fundamentally different from and much more diffi cult than its counterpart for digital circuits. These efforts have led to some important findings, but are still not at the point of being practicaIly useful. However, these situations are now changing. The current trend for the design of VLSI chips is to use analog/digital hybrid circuits, instead of digital circuits from the past. Therefore, even Ix x Preface though the analog circuit may be small, the total circuit under testing is large.

This book provides a comprehensive discussion of automatic testing, diagnosis and tuning of analogue, mixed-signal and RF integrated circuits, and systems in a single source. As well as fundamental concepts and techniques, the book reports systematically the state of the arts and future research directions of those areas. A complete range of circuit components are covered and test issues from the SoC perspective. An essential reference for researchers and engineers in mixed signal testing, postgraduate and senior undergraduate students.

The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Enables the reader to test an analog circuit that is implemented either in bipolar or MOS technology. Examines the testing and fault diagnosis of analog and analog part of mixed signal circuits. Covers the testing and fault diagnosis of both bipolar and Metal Oxide Semiconductor (MOS) circuits and introduces . Also contains problems that can be used as quiz or homework.

"System level testing is becoming increasingly important. It is driven by the incessant march of complexity ... which is forcing us to renew our thinking on the processes and procedures that we apply to test and diagnosis of systems. In fact, the complexity defines the system itself which, for our purposes, is ¿any aggregation of related elements that together form an entity of sufficient complexity for which it is impractical to treat all of the elements at the lowest level of detail . System approaches embody the partitioning of problems into smaller inter-related subsystems that will be solved together. Thus, words like hierarchical, dependence, inference, model, and partitioning are frequent throughout this text. Each of the authors deals with the complexity issue in a similar fashion, but the real value in a collected work such as this is in the subtle differences that may lead to synthesized approaches that allow even more progress. The works included in this volume are an outgrowth of the 2nd International Workshop on System Test and Diagnosis held in Alexandria, Virginia in April 1998. The first such workshop was held in Freiburg, Germany, six years earlier. In the current workshop nearly 50 experts from around the world struggled over issues concerning the subject... In this volume, a select group of workshop participants was invited to provide a chapter that expanded their workshop presentations and incorporated their workshop interactions... While we have attempted to present the work as one volume and requested some revision to the work, the content of the individual chapters was not edited significantly. Consequently, you will see different approaches to solving the same problems and occasional disagreement between authors as to definitions or the importance of factors. ... The works collected in this volume represent the state-of-the-art in system test and diagnosis, and the authors are at the leading edge of that science...”. From the Preface

The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.

The 2nd edition of defect oriented testing has been extensively updated. New chapters on Functional, Parametric Defect Models and Inductive fault Analysis and Yield Engineering have been added to provide a link between defect sources and yield. The chapter on RAM testing has been updated with focus on parametric and SRAM stability testing. Similarly, newer material has been incorporated in digital fault modeling and analog testing chapters. The strength of Defect Oriented Testing for nano-Metric CMOS VLSIs lies in its industrial relevance.

The use of the wavelet transform to analyze the behaviour of the complex systems from various fields started to be widely recognized and applied successfully during the last few decades. In this book some advances in wavelet theory and their applications in engineering, physics and technology are presented. The applications were carefully selected and grouped in five main sections - Signal Processing, Electrical Systems, Fault Diagnosis and Monitoring, Image Processing and Applications in Engineering. One of the key features of this book is that the wavelet concepts have been described from a point of view that is familiar to researchers from various branches of science and engineering. The content of the book is accessible to a large number of readers.

This volume contains a collection of papers presented at the NATO Advanced Study Institute on ·Testing and Diagnosis of VLSI and ULSI" held at Villa Olmo, Como (Italy) June 22 -July 3,1987. High Density technologies such as Very-Large Scale Integration (VLSI), Wafer Scale Integration (WSI) and the not-so-far promises of Ultra-Large Scale Integration (ULSI), have exasperated the problema associated with the testing and diagnosis of these devices and systema. Traditional techniques are fast becoming obsolete due to unique requirements such as limited controllability and observability, increasing execution complexity for test vector generation and high cost of fault simulation, to mention just a few. New approaches are imperative to achieve the highly sought goal of the • three months· turn around cycle time for a state-of-the-art computer chip. The importance of testing and diagnostic processes is of primary importance if costs must be kept at acceptable levels. The objective of this NATO-ASI was to present, analyze and discuss the various facets of testing and diagnosis with respect to both theory and practice. The contents of this volume reflect the diversity of approaches currently available to reduce test and diagnosis time. These approaches are described in a concise, yet clear way by renowned experts of the field. Their contributions are aimed at a wide readership: the uninitiated researcher will find the tutorial chapters very rewarding. The expert wiII be introduced to advanced techniques in a very comprehensive manner.

The main scope of this publication is to promote collaborations among research groups in the community and to interchange ideas, allowing researchers to get a quick overview of the state of the art. This volume looks at topics including robotics and computer vision and multiagent systems.