The Chemistry and Physics of Coatings provides an introduction to the science underpinning the paint (organic coatings) industry to graduate level chemists who may have no previous knowledge of polymer-based technologies. This book stresses important physical phenomena such as rheology, film formation, and mechanical properties, their exploitation in paint, and the economic and legislative background against which coatings technology is tested. Attention is given to the chemistry of the polymers, pigments, and solvents that compose typical coatings, and the complex 'science and art' of formulating them effectively. The book also aims to give insights into the commercial application of the chemistries described, and includes a glossary of industry and polymer-related terms. Revised and updated, this second edition has been expanded to include separate chapters on binders for high solids and solvent-free coatings, inorganic and hybrid coatings and coatings formulation. There is also a new section on coatings additives. The Chemistry and Physics of Coatings will be of particular interest to graduates of materials and polymer sciences and related areas. It will also appeal to undergraduates, lecturers and those in the paint industry. Extracts from reviews of 1st Edition "... readable and surprisingly comprehensive ... In short this is an excellent book, which I recommend without hesitation." Journal of Materials Chemistry "..an informative and thoroughly recommended volume." Polymer International

This is an overview of the science to be encountered in the paint (organic coatings) industry, for those well versed in chemistry but with perhaps no previous knowledge of polymer science. The physics of coatings application, film formation and performance, the chemistry of coatings components (notably polymers) and their assembly into paint, and the economic and legislative background against which coatings technology is tested are all covered in this text.

Materials in Conservation is the definitive introduction to the properties of materials used in conservation. The continual struggle of conservators to ameliorate the deterioration of objects has led to increasing use of synthetic polymers. These materials are part of the sophisticated technology that has been developed to augment and often replace traditional materials and methods. Conservators therefore have a wider range of techniques available. However, they must be able to appreciate the potentials and pitfalls of any proposed technique. The first section explains physical and chemical properties which are important in the conservation process, i.e. application, ageing, reversal. The topics covered include molecular weight, glass transition temperature, solubility and solvents, polymerisation and degradation reactions. The second section provides a detailed consideration of the individual materials, current and obsolete, used in conservation, drawing out the factors relevant to their effects on objects. The conservation uses of each material are summarised and referenced to allow further study. In five appendices, the properties of the polymers, solvents and their interactions are tabulated, with a list of suppliers and conversion table of physical units. IUPAC and SI nomenclature is used throughout the book. In this second edition, this classic text is revised and updated to include modern materials such as cyclododecane, and current ideas on adhesion, consolidation and reversibility, making Materials in Conservation the definitive source of vital information in the field. This handy reference book should be on the bench of every conservator and available wherever objects, from steam engines to dried plants, are preserved.

The automobile industry and varnish manufacturers are expending considerable amounts of money to produce particularly appealing surfaces. The main task of a lacquer is protection against corrosion, weathering and chemical and mechanical influences, as well as obtaining the appealing surface. Different manufacturers specialize exclusively in automobile lacquers. This book deals with the composition and the production of the different components and their physical characteristics as well as their application technology characteristics. Therefore both the application behavior, the task of protection, and the corresponding appearance are covered in detail.

Modern industry imposes ever increasing requirements upon tools and tool materials as to the provision for performance under the conditions of high cutting speeds and dynamic loads as well as under intensive thermal and chemical interactions with workpiece materials. The industry demands a higher productivity in combination with the accuracy of geometry and dimensions of workpieces and quality of working surfaces of the machined pieces. These requirements are best met by the tool superhard materials (diamond and diamond-like cubic boron nitride). Ceramics based on silicon carbide, aluminum and boron oxides as well as on titanium, silicon and aluminum nitrides offer promise as tool materials. Tungsten-containing cemented carbides are still considered as suitable tool materials. Hi- hardness and high strength composites based on the above materials fit all the requirements imposed by machining jobs when manufacturing elements of machinery, in particular those operating under the extreme conditions of high temperatures and loads. These elements are produced of difficult-- machine high-alloy steels, nickel refractory alloys, high-tech ceramics, materials with metallic and non-metallic coatings having improved wear resistance, as well as of special polymeric and glass-ceramic materials. Materials science at high pressure deals with the use of high-pressure techniques for the development and production of unique materials whose preparation at ambient pressure is impossible (e. g. , diamond, cubic boron nitride, etc. ) or of materials with properties exceeding those of materials produced at ambient pressure (e. g. , high-temperature superconductors).

Advances are continuously being made in applying the coatings and surface treatments by different techniques to reduce the damages from tribology. Engineers need more detailed information to compare the capability of each coating process in wear resistant and lubrication applications. It is also important to focus on the concepts of tribology in various applications such as the manufacturing process, bio implants, machine elements, and corrosive environments. The need for a comprehensive resource addressing these findings in order to improve wear resistance is unavoidable. The Handbook of Research on Tribology in Coatings and Surface Treatment evaluates the latest advances the fabrication of wear-resistant and lubricant coatings by different techniques and investigates wear-resistant coatings and surface treatments in various applications such as the automobile industry. Covering a wide range of topics such as lubricant coatings and wearable electronic devices, it is ideal for engineers, industry professionals, researchers, academicians, scholars, practitioners, instructors, and students.

Proceedings of the NATO Advanced Study Institute, held in Kaunas, Lithuania, from 3-14 September 2001

Innovations in Materials Chemistry, Physics, and Engineering Research is an all-encompassing book edited by Eugene de Silva, the Head of Multi-disciplinary Research in Applied Science (MRAS), and Pramudi Abeydeera, a prominent figure in polymer chemistry. The book explores the latest research and innovations in materials chemistry, physics, engineering, and other related areas. It seeks to inform researchers, policymakers, and the wider public about the most recent theoretical and experimental research in the field. The book covers many topics, including the fundamental mechanisms of reactions, applications, synthesis, properties, and innovations in materials chemistry. It also contains critical reviews of past and current research, which provides the reader with a comprehensive understanding of the subject matter. By doing so, the book promotes collaborative research by facilitating the sharing of information and directing research toward new avenues in research and industrial development. It is an indispensable resource for universities, colleges, research centers, and industries. This book is particularly relevant for polymer scientists who find the latest research on materials chemistry, physics, engineering, and allied fields beneficial for their research endeavors.