This book focuses on latent heat storage, which is one of the most efficient ways of storing thermal energy. Unlike the sensible heat storage method, the latent heat storage method provides much higher storage density with a smaller difference between storing and releasing temperatures. Thermal Energy Storage with Phase Change Materials is structured into four chapters that cover many aspects of thermal energy storage and their practical applications. Chapter 1 reviews selection, performance, and applications of phase change materials. Chapter 2 investigates mathematical analyses of phase change processes. Chapters 3 and 4 present passive and active applications for energy saving, peak load shifting, and price-based control heating using phase change materials. These chapters explore the hot topic of energy saving in an overarching way, and so they are relevant to all courses. This book is an ideal research reference for students at the postgraduate level. It also serves as a useful reference for electrical, mechanical, and chemical engineers and students throughout their work. FEATURES Explains the technical principles of thermal energy storage, including materials and applications in different classifications Provides fundamental calculations of heat transfer with phase change Discusses the benefits and limitations of different types of phase change materials (PCM) in both micro- and macroencapsulations Reviews the mechanisms and applications of available thermal energy storage systems Introduces innovative solutions in hot and cold storage applications

Thermal energy storage using phase change materials (PCMs) is a research topic that has attracted much attention in recent decades. This is mainly due to the potential use of PCMs as latent storage media in a large variety of applications. Although many kinds of PCMs are already commercial products, advanced materials with improved properties and new latent storage concepts are required to better meet the specific requirements of different applications. Moreover, the development of common validation procedures for PCMs is an important issue that should be addressed in order to achieve commercial deployment and implementation of these kinds of materials in latent storage systems. The key subjects addressed on the five papers included in this Special Issue are related to methodologies for material selection, PCM validation and assessment procedures, innovative approaches of PCM applications together with simulation and testing of latent storage prototypes.

This book presents a comprehensive introduction to the use of solid‐liquid phase change materials to store significant amounts of energy in the latent heat of fusion. The proper selection of materials for different applications is covered in detail, as is the use of high conductivity additives to enhance thermal diffusivity. Dr. Fleischer explores how applications of PCMS have expanded over the past 10 years to include the development of high efficiency building materials to reduce heating and cooling needs, smart material design for clothing, portable electronic systems thermal management, solar thermal power plant design and many others. Additional future research directions and challenges are also discussed.

This short book provides an update on various methods for incorporating phase changing materials (PCMs) into building structures. It discusses previous research into optimizing the integration of PCMs into surrounding walls (gypsum board and interior plaster products), trombe walls, ceramic floor tiles, concrete elements (walls and pavements), windows, concrete and brick masonry, underfloor heating, ceilings, thermal insulation and furniture an indoor appliances. Based on the phase change state, PCMs fall into three groups: solid–solid PCMs, solid–liquid PCMs and liquid–gas PCMs. Of these the solid–liquid PCMs, which include organic PCMs, inorganic PCMs and eutectics, are suitable for thermal energy storage. The process of selecting an appropriate PCM is extremely complex, but crucial for thermal energy storage. The potential PCM should have a suitable melting temperature, and the desirable heat of fusion and thermal conductivity specified by the practical application. Thus, the methods of measuring the thermal properties of PCMs are key. With suitable PCMs and the correct incorporation method, latent heat thermal energy storage (LHTES) can be economically efficient for heating and cooling buildings. However, several problems need to be tackled before LHTES can reliably and practically be applied.

During the last two decades many research and development activities related to energy have concentrated on efficient energy use and energy savings and conservation. In this regard, Thermal Energy Storage (TES) systems can play an important role, as they provide great potential for facilitating energy savings and reducing environmental impact. Thermal storage has received increasing interest in recent years in terms of its applications, and the enormous potential it offers both for more effective use of thermal equipment and for economic, large-scale energy substitutions. Indeed, TES appears to provide one of the most advantageous solutions for correcting the mismatch that often occurs between the supply and demand of energy. Despite this increase in attention, no book is currently available which comprehensively covers TES. Presenting contributions from prominent researchers and scientists, this book is primarily concerned with TES systems and their applications. It begins with a brief summary of general aspects of thermodynamics, fluid mechanics and heat transfer, and then goes on to discuss energy storage technologies, environmental aspects of TES, energy and exergy analyses, and practical applications. Furthermore, this book provides coverage of the theoretical, experimental and numerical techniques employed in the field of thermal storage. Numerous case studies and illustrative examples are included throughout. Some of the unique features of this book include: * State-of-the art descriptions of many facets of TES systems and applications * In-depth coverage of exergy analysis and thermodynamic optimization of TES systems * Extensive new material on TES technologies, including advances due to innovations in sensible- and latent-energy storage * Key chapters on environmental issues, sustainable development and energy savings * Extensive coverage of practical aspects of the design, evaluation, selection and implementation of TES systems * Wide coverage of TES-system modelling, ranging in level from elementary to advanced * Abundant design examples, case studies and references In short, this book forms a valuable reference resource for practicing engineers and researchers, and a research-oriented text book for advanced undergraduate and graduate students of various engineering disciplines. Instructors will find that its breadth and structure make it an ideal core text for TES and related courses.

High-Temperature Thermal Storage Systems Using Phase Change Materials offers an overview of several high-temperature phase change material (PCM) thermal storage systems concepts, developed by several well-known global institutions with increasing interest in high temperature PCM applications such as solar cooling, waste heat and concentrated solar power (CSP). The book is uniquely arranged by concepts rather than categories, and includes advanced topics such as thermal storage material packaging, arrangement of flow bed, analysis of flow and heat transfer in the flow bed, energy storage analysis, storage volume sizing and applications in different temperature ranges. By comparing the varying approaches and results of different research centers and offering state-of-the-art concepts, the authors share new and advanced knowledge from researchers all over the world. This reference will be useful for researchers and academia interested in the concepts and applications and different techniques involved in high temperature PCM thermal storage systems. - Offers coverage of several high temperature PCM thermal storage systems concepts developed by several leading research institutions - Provides new and advanced knowledge from researchers all over the world - Includes a base of material properties throughout

Thermal energy storage technologies are gaining attention nowadays for uninterrupted supply of solar power in off-sunshine hours. An indigenized solar phase change material (PCM) system was developed and performance evaluated in the current study to efficiently store solar thermal power using a latent heat storage approach, which can be utilized in any subsequent decentralized food processing application. A 2.5 m2 laying Scheffler reflector is used to precisely focus the incoming direct normal irradiance (DNI) on a casted aluminum heat receiver (220 mm diameter) from where this concentrated heat energy is absorbed and conducted to the PCM unit by the flow of thermal oil (Fragoltherm-32 thermo-oil). During the circulation around PCM pipes inside the PCM unit, thermal oil discharges heat energy to the PCM, which undergoes change of phase from solid to liquid. Computational fluid dynamics (CFD) analysis of the PCM unit were also performed according to the actual boundary conditions, which gave satisfactory results in terms of temperature and velocity distribution. With an average DNI of 781 W/m2, the highest temperature of the receiver surface during the trials was observed at about 155 C that produces thermal oil at 110°C inside the receiver and around 48°C of PCM in the PCM unit. The heat energy losses per unit time (W) due to the lack of reflectivity from the Scheffler reflector, out-of-focus radiations at the targeted area, absorptivity of heat receiver, piping system losses, and cylinder losses (in the form of conduction, convection, and radiations using 50 mm insulation thickness) were found to be 110 W (10 %), 99 W (9 %), 89 W (8 %), 128 W (12 %), 161 W (15 %), and 89 W (8 %), respectively. These findings of CFD analysis and mathematical modeling were also consistent with real-time data, which was logged through an online Control and Monitoring Interface portal. The final energy available to the PCM was 414W with an overall system efficiency of 38 %, which can be improved by decreasing thermal losses of the system and using other PCM materials.

Thermal energy storage using phase change materials (PCMs) is a research topic that has attracted much attention in recent decades. This is mainly due to the potential use of PCMs as latent storage media in a large variety of applications. Although many kinds of PCMs are already commercial products, advanced materials with improved properties and new latent storage concepts are required to better meet the specific requirements of different applications. Moreover, the development of common validation procedures for PCMs is an important issue that should be addressed in order to achieve commercial deployment and implementation of these kinds of materials in latent storage systems. The key subjects addressed on the five papers included in this Special Issue are related to methodologies for material selection, PCM validation and assessment procedures, innovative approaches of PCM applications together with simulation and testing of latent storage prototypes.

Multifunctional Phase Change Materials: Fundamentals, Properties and Applications updates on phase change materials (PCMs) used for the storage of thermal energy as sensible and latent heat. This class of materials is the subject of intensive research, both fundamental and applied, as they substantially contribute to the efficient use and conservation of waste heat and solar energy. Different groups of materials have been investigated as PCMs, including inorganic systems (salt and salt hydrates), organic, e.g., paraffins or fatty acids, polymers, and finally, hybrid materials. Recent developments are focused on multifunctional PCMs that provide functional features apart from energy storage, such as desired optical or antibacterial properties. This book presents various synthesis approaches for functionalized materials, as well as specific interactions and self-organization effects in polymer/functionalized (nano)particle systems. It reviews the current state-of-the-art in multifunctional phase change materials for thermal energy storage applications by describing the fundamentals of energy storage, the main classes of PCMs, functionalization protocols, encapsulation methods and shape stabilization procedures. - Covers the most important developments in PCMs that have expanded rapidly over the last few years, including thermochromic and thermoelectric PCMs, as well as fluorescence-functionalized phase change materials - Includes the newest solutions in PCMs related to functionalization and shape stabilization, e.g., nano-encapsulation and electrospun ultrafine phase change fibers - Provides a multidisciplinary, comprehensive work that will be of interest for a wide readership active in various disciplines, from materials science to environmental engineering

To store thermal energy, sensible and latent heat storage materials are widely used. Latent heat thermal energy storage (TES) systems using phase change materials (PCM) are useful because of their ability to charge and discharge a large amount of heat from a small mass at constant temperature during a phase transformation. Molten salt PCM candidates for cascaded PCMs were evaluated for the temperatures near 320, 350, and 380 degrees C. These temperatures were selected to fill the 300 to 400 degrees C operating range typical for parabolic trough systems, that is, as one might employ in three-PCM cascaded thermal storage. Based on the results, the best candidate for temperatures near 320 degrees C was the molten salt KNO3-4.5wt%KCl. For the 350 and 380 degrees C temperatures, the evaluated molten salts are not good candidates because of the corrosiveness and the high vapor pressure of the chlorides.