A comprehensive summary of the state of the art in Ultra Wideband system engineering, from components to system engineering aspects.

This book discusses innovation in ultra-wideband (UWB) technologies and systems. Divided into four sections, the volume introduces UWB technologies and RF modules, examines applications of these systems in areas such as medicine and sports, and discusses the importance of an accurate design of microwave modules and antennas.

In this work, the realization limits of an impulse-based Ultra-Wideband (UWB) localization system for indoor applications have been thoroughly investigated and verified by measurements. The analysis spans from the position calculation algorithms, through hardware realization and modeling, up to the localization experiments conducted in realistic scenarios. The main focus was put on identification and characterization of limiting factors as well as developing methods to overcome them.

Ultra-wideband Radio Frequency Identification Systems describes the essentials of radio frequency identification (RFID)systems as well as their target markets. The book covers a study of commercially available RFID systems and characterizes their performance in terms of read range and reliability in the presence of conductive and dielectric materials. The capabilities and limitations of commercial RFID systems are reported followed by comprehensive discussions of the advantages and challenges of using ultra-wideband (UWB) technology for tag/reader communications. The book presents practical aspects of RFID system such as: EPC global and ISO standards, implementation, and target markets in a simple and easy to understand language.

In our increasingly interconnected world, personalized and technology-assisted healthcare has become a rising trend. In an ageing society, technology enables new ways to care for and assist the elderly. Falls pose a major risk and cause of injuries for senior citizens. Technology-backed fall prevention thus has the potential to avoid severe injuries and further loss of independence, but requires continuous monitoring of the body posture in order to identify imminent falls. This work presents a system concept for a wearable wireless body area network (WBAN) for posture monitoring. It shows the principal feasibility of posture recognition from ultra-wideband (UWB) signals based on a large and diverse set of measurements. For a promising classifier-feature-combination, this work demonstrates how reliable posture recognition can be achieved with a limited number of body-mounted nodes, and analyzes its robustness towards potential pitfalls. It concludes with a proposal for a system implementation, and outlines its integration with existing and future aspects of personalized healthcare.

Chipless RFID based on RF Encoding Particle: Realization, Coding and Reading System explores the field of chipless identification based on the RF Encoding Particle (REP). The book covers the possibility of collecting information remotely with RF waves (RFID) with totally passive tags without wire, batteries, and chips, and even printed on paper. Despite the many benefits of RFID, deployment is still hindered by several economic and technological factors. Among these barriers are the high cost of tags, lack of reliability and security in the information contained in the RFID chip, and how tags are 'recycled.' This book focuses on the development of chipless RFID tags, representing a new family of low cost tags. With this technology information is extracted from the electromagnetic response of the tag, which depends only on its geometry. Various solutions have been developed by the authors to increase the amount of information, reduce the surface of the tag, or improve the robustness of detection. Considerations such as realization using paper substrate, the development of a low cost detection system, and measurements in a real environment have been addressed for practical implementation. - Introduces the chipless RFID REP approach as compared to classical chipless RFID, RFID, and barcode technologies - Includes a demonstration of the practical and economic potential of chipless RFID technology, with detailed presentations and discussions of different test benches and comparisons - Presents in detail numerous examples of chipless tags that are able to tackle specific problems: sensitivity of detection, encoding density, robustness of detection, problem of tag orientation, tags and reader cost, and compliance with emission standards - Focuses on the development of chipless RFID tags, representing a new family of low cost tags

The research described here develops and applies novel, ultra-wideband (UWB) antipodal Vivaldi antennas for high-resolution detection of defects and damages in composite construction materials and structures using their microwave and millimeter wave imaging. The author examines the challenges of applying the UWB microwave technique in that the technique is dependent on the operating frequency used for the specified material under test. In this context, the objectives of this research volume include, but are not limited to, development of a small UWB antenna at frequency range from 5 GHz - 50 GHz for microwave and millimeter wave imaging of wide range of low loss construction materials, design of a small UWB antenna operating for microwave and millimeter wave imaging of low loss and high loss materials for the purpose of detection of surface damages of concrete under low loss materials, and development of a UWB antenna at frequency range from 2 GHz - 27 GHz for microwave imaging of low loss and high loss materials such as concrete structures and layered structures for the purpose of detection of cavities inside concrete.

This book aims to examine innovation in the fields of computer engineering and networking. The book covers important emerging topics in computer engineering and networking, and it will help researchers and engineers improve their knowledge of state-of-art in related areas. The book presents papers from The Proceedings of the 2013 International Conference on Computer Engineering and Network (CENet2013) which was held on 20-21 July, in Shanghai, China.

Learn how new materials and electronics technologies can make RFID systems more energy efficient and environmentally friendly. Experts show you how energy scavenging, passive/chipless RFID, RFID passive sensors, networked RFID, energy harvesting, organic devices, and wide area electronics can be used to develop green solutions for the Internet of Things.

This comprehensive treatment of ultrawideband (UWB) antennas and time-domain microwave engineering serves as an invaluable practical reference for anyone involved in antenna and RF design work. This authoritative volume enables readers to select the proper UWB antennas for their applications, design and analyze UWB antennas, and integrate these antennas in an RF system. By applying time-domain thinking to problems of practical interest, the reader will not only learn how to build and analyze antennas, but also understand them at the most fundamental level. This second edition is updated and expanded throughout, providing readers with a history of antennas, numerous new problem sets and worked examples, along with new information on plotting time-domain field lines, time-domain reflectometry, matching techniques, and more. This book also addresses system issues like spectral control and antenna efficiency.