Get one step closer to becoming a Florida Air A contractor with a prep course designed by 1 Exam Prep to help you conquer the required Florida Air A Contractors Trade Knowledge computer based examination. Use a blended, self-study and virtual class structure to tailor your prep to your individual learning style. Testing taking techniques and tips Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Florida Class A Air-Conditioning Contractor is a contractor whose services are unlimited in the execution of contracts requiring the experience, knowledge, and skill to install, maintain, repair, fabricate, alter, extend, or design, if not prohibited by law, central air-conditioning, refrigeration, heating, and ventilating systems, including duct work in connection with a complete system if such duct work is performed by the contractor as necessary to complete an air-distribution system, boiler, and unfired pressure vessel systems, and all appurtenances, apparatus, or equipment used in connection therewith, and any duct cleaning and equipment sanitizing that requires at least a partial disassembling of the system; to install, maintain, repair, fabricate, alter, extend, or design, if not prohibited by law, piping, insulation of pipes, vessels and ducts, pressure and process piping, and pneumatic control piping; to replace, disconnect, or reconnect power wiring on the load side of the dedicated existing electrical disconnect switch; to install, disconnect, and reconnect low voltage heating, ventilating, and air-conditioning control wiring; and to install a condensate drain from an air-conditioning unit to an existing safe waste or other approved disposal other than a direct connection to a sanitary system. The scope of work for such contractor also includes any excavation work incidental thereto, but does not include any work such as liquefied petroleum or natural gas fuel lines within buildings, except for disconnecting or reconnecting changeouts of liquefied petroleum or natural gas appliances within buildings; potable water lines or connections thereto; sanitary sewer lines; swimming pool piping and filters; or electrical power wiring. A Class A air-conditioning contractor may test and evaluate central air-conditioning, refrigeration, heating, and ventilating systems, including duct work; however, a mandatory licensing requirement is not established for the performance of these specific services.

Get one step closer to becoming a Florida County PROV Class B Air Conditioning Contractor with a prep course designed by 1ExamPrep to help you conquer the Florida County PROV Class B Air Conditioning computer-based examination. Our courses make it convenient and easy for EVERY type of student who is attempting to obtain a contractor’s license. The course includes: Test-taking techniques and tips Tab and highlight locations for every required book Hundreds of Practice questions. We base these per book so you can understand which questions come from which book to better know where to find the answer, as well as final exams to reinforce your test taking skills.

Get one step closer to becoming a Florida Glass and Glazing contractor with a exam prep book designed by 1 Exam Prep to help you conquer the required 2023 Florida Glass and Glazing Contractor Trade Knowledge examination. Test taking techniques and tips Highlight and tab locations for the references books Practice questions Covered topics include information: A Glass and Glazing contractor falls under the category of a Specialty Contractor. The scope of work for this contractor is limited to the installation and attachment of all types of windows and glass, the installation of swinging or sliding glass doors to the existing walls, floors, columns, or other structural members of the building, the installation of glass holding or supporting mullions or horizontal bars which are attached to existing building walls, floors, columns, or other structural members of the building, and the cutting and installation of glass and mirrors. This license also allows installation of prefabricated glass, metal or plastic curtain walls and panels, caulking incidental to such work and assembly, and installation of shower and tub enclosures and metal fascias.

Volume 1 of 3 Get one step closer to becoming a Florida State General Contractor with a book designed by 1 Exam Prep to help you conquer the required Pearson Vue Contract Administration and Project Management examination. Book Features: Highlighting and tabbing locations for each required book, so you can quickly and easily reference your materials during the exam Practice questions printable PDF format and timed simulated computer-based format

Get one step closer to becoming a Florida County PROV Master Mechanical Contractor with a prep course designed by 1ExamPrep to help you conquer the Florida County PROV Master Mechanical computer-based examination. Our courses make it convenient and easy for EVERY type of student who is attempting to obtain a contractor’s license. The course includes: Test-taking techniques and tips Tab and highlight locations for every required book Hundreds of Practice questions. We base these per book so you can understand which questions come from which book to better know where to find the answer, as well as final exams to reinforce your test taking skills.

Volume 1 of 2 Get one step closer to becoming a Florida State Plumbing Contractor with a prep course designed by 1 Exam Prep to help you conquer the required Plumbing Contractors Trade Knowledge exam. Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Testing taking techniques that are an indispensable part of these open-book exams A Florida Plumbing Contractor is a contractor whose services are unlimited in the plumbing trade and includes contracting business consisting of the execution of contracts requiring the experience, financial means, knowledge, and skill to install, maintain, repair, alter, extend, or, if not prohibited by law, design plumbing. A plumbing contractor may install, maintain, repair, alter, extend, or, if not prohibited by law, design the following without obtaining an additional local regulatory license, certificate, or registration: sanitary drainage or storm drainage facilities, water and sewer plants and substations, venting systems, public or private water supply systems, septic tanks, drainage and supply wells, swimming pool piping, irrigation systems, and solar heating water systems and all appurtenances, apparatus, or equipment used in connection therewith, including boilers and pressure process piping and including the installation of water, natural gas, liquefied petroleum gas and related venting, and storm and sanitary sewer lines. The scope of work of the plumbing contractor also includes the design, if not prohibited by law, and installation, maintenance, repair, alteration, or extension of air-piping, vacuum line piping, oxygen line piping, nitrous oxide piping, and all related medical gas systems; fire line standpipes and fire sprinklers if authorized by law; ink and chemical lines; fuel oil and gasoline piping and tank and pump installation, except bulk storage plants; and pneumatic control piping systems, all in a manner that complies with all plans, specifications, codes, laws, and regulations applicable. The scope of work of the plumbing contractor applies to private property and public property, including any excavation work incidental thereto, and includes the work of the specialty plumbing contractor. Such contractor shall subcontract, with a qualified contractor in the field concerned, all other work incidental to the work but which is specified as being the work of a trade other than that of a plumbing contractor. A plumbing contractor may perform drain cleaning and clearing and install or repair rainwater catchment systems; however, a mandatory licensing requirement is not established for the performance of these specific services. FLORIDA STATE PLUMBING EXAM DATES AND DEADLINES: The plumbing (trade knowledge) examinations are administered in paper and pencil format multiple times per year in Orlando only. To register for the exam visit www.floridaexam.com Exam DateDeadlineExam Location February 27-28, 2023January 29, 2023Osceola Heritage Park, Exhibition Building April 11-12, 2023March 12, 2023Osceola Heritage Park, Exhibition Building June 26-27, 2023May 28, 2023Osceola Heritage Park, Exhibition Building August 15-16, 2023July 16, 2023Osceola Heritage Park, Exhibition Building October 17-18, 2023September 17, 2023Osceola Heritage Park, Exhibition Building December 12-13, 2023November 12, 2023Osceola Heritage Park, Exhibition Building

Get one step closer to becoming a Florida Commercial Pool Contractor with a prep course designed by 1 Exan Prep to help you conquer the required Florida Commercial Pool Contractor exam. A Commercial Pool and Spa Contractor is a contractor whose scope of work involves, but is not limited to, the construction, repair, and servicing of any swimming pool, or hot tub or spa, whether public, private or otherwise, regardless of use. The scope of work includes the installation, repair, or replacement of existing equipment, any cleaning or equipment sanitizing that requires at least a partial disassembling, excluding filter changes, and the installation of new pool/spa equipment, interior finishes, the installation of package pool heaters, the installation of all perimeter piping and filter piping, and the construction of equipment rooms or housing for pool/spa equipment, and also includes the scope of work of a swimming pool/spa servicing contractor. The study guide will cover the topics on the exam: Excavation, Grading, Backfill, Compacting Plumbing Components Electrical Components Shell Placement Deck Work Tile, Coping, and Trim Work Interior Surface Preparation and Finishing Commercial Repair/Servicing and Residential Installation in the areas of Excavation, Grading, Backfill, Compacting Plumbing Components Electrical Components Deck Work Tile, Coping, and Trim Work Shell Placement Interior Surface Preparation and Finishing

Volume 1 of 2 Get one step closer to becoming a Florida Electrical contractor with a book course designed by 1 Exam Prep to help you conquer the required Florida Electrical Contractor examination. Highlighting and tabbing location for each required book, so you can quickly and easily reference your materials during the exam Practice questions Testing taking techniques that are an indispensable part of these open-book exams SCOPE - APPLIES TO ALL OF THE BELOW: Lighting Maintenance Specialty Electrical Contractor. The scope of certification of a lighting maintenance specialty contractor is limited to the installation, repair, alteration, or replacement of lighting fixtures in or on buildings, signs, billboards, roadways, streets, parking lots and other similar structures. However, the scope of the certification does not include the provision of, or work beyond, the last electrical supplying source, outlet, or disconnecting means. Sign Specialty Electrical Contractor. The scope of certification includes the structural fabrication including concrete foundation, erection, installation, alteration, repair, service and wiring of electrical signs and outline lighting. The scope of certification shall not include the provision of, or any electrical work beyond, the last disconnect mean or terminal points. However, a contractor certified under this section may provide the electrical entrance requirements for metering and main disconnect of remote billboards or signs which are independent of any structure or building and which require no more than twenty-five (25) kilowatts at two hundred fifty (250) volts maximum. Residential Electrical Contractor. The scope of certification includes installation, repair, alteration, addition to, replacement of or design of electrical wiring, fixtures, appliances, apparatus, raceways, conduit, or any part thereof, in a 1, 2, 3, or 4 family residence not exceeding 2 stories in height, and accessory use structures in connection with the residence. The electrical service installed or worked upon is limited to single phase, 400 ampere single service. Limited Energy Systems Specialty. The scope of certification of a limited energy systems specialty contractor includes the installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, and fiber optics (transmission of light over stranded glass) or any part thereof not to exceed 98 volts, (RMS). The scope of work of this license does not include installation, repair, fabrication, erection, alteration, addition to, or design of electrical wiring, fixtures, appliances, thermostats, apparatus, raceways, conduit, that are part of an alarm system. The scope of certification is limited to electrical circuits and equipment as set forth in Section 489.505(7), F.S. The scope of certification shall not include work performed by public utilities exempt under the terms of Section 489.503(4), F.S., or exempt due to the regulatory jurisdiction of the Florida Public Service Commission. The scope of work of this license may also be performed by the following certified and registered license categories: Unlimited Electrical Contractor, Alarm System Contractor I, Alarm System Contractor II, and Residential Electrical Contractor. Utility Line Electrical Contractor. The scope of certification of a utility line electrical contractor means a utility contractor whose business includes all types of transmission electrical circuits, distribution electrical circuits, and substation construction done for investor-owned electrical utilities, city municipal electrical utilities, and cooperatives under the rural electric authority between the point of origin and point of delivery

OUR STATE SIGN SPECIALTY ELECTRICAL CONTRACTOR EXAM PREP INCLUDES: Highlight and tab locations for all of the reference books Test taking techniques Practice Questions and Answers SCOPE - APPLIES TO THE BELOW: Sign Specialty Electrical Contractor. The scope of certification includes the structural fabrication including concrete foundation, erection, installation, alteration, repair, service and wiring of electrical signs and outline lighting. The scope of certification shall not include the provision of, or any electrical work beyond, the last disconnect mean or terminal points. However, a contractor certified under this section may provide the electrical entrance requirements for metering and main disconnect of remote billboards or signs which are independent of any structure or building and which require no more than twenty-five (25) kilowatts at two hundred fifty (250) volts maximum.

Get one step closer to becoming a Florida State Contractor with a prep course designed by 1ExamPrep to help you conquer the required Pearson Vue Business and Finance examination Course Features: Highlighting and tabbing locations for each required book, so you can quickly and easily reference your materials during the exam Practice questions printable PDF format and timed simulated computer-based format 100's of Practice Questions The Business and Finance exam is a requirement for all types of contractors to become licensed in the State of Florida. This exam must be taken in addition to the contractor or trade exam for which you are trying to become licensed. Topics covered on the business and finance exam portion are establishing the contracting business, managing administrative duties, managing trade operations, conducting accounting functions, managing human resources, and complying with government regulation.