The industrial revolution, mechanization, water and steam power, computers, and automation have given an enormous boost to manufacturing productivity. "Faster, Better, Cheaper" in the History of Manufacturing shows how the ability to make products faster, better, and cheaper has evolved from the stone age to modern times. It explains how different developments over time have raised efficiency and allowed the production of more and better products with less effort and materials, and hence faster, better, and cheaper. In addition, it describes the stories of inventors, entrepreneurs, and industrialists and looks at the intersection between technology, society, machines, materials, management, and – most of all – humans. "Faster, Better, Cheaper" in the History of Manufacturing follows this development throughout the ages. This book covers not only the technical aspects (mechanization, power sources, new materials, interchangeable parts, electricity, automation), but organizational innovations (division of labor, Fordism, Talyorism, Lean). Most of all, it is a story of the people that invented, manufactured, and marketed the products. The book shows how different developments over time raised efficiency and allowed production of more with less effort and materials, which brought us a large part of the wealth and prosperity we enjoy today. The stories of real inventors and industrialists are told, which includes not only their successes but also their problems and failures. The effect of good or bad management on manufacturing is a recurring theme in many chapters, as is the fight for intellectual property through thrilling tales of espionage. This is a story of successes and failures. It is not only about technology but also about social aspects. Ultimately, it is not a book about machines but about people!

This edited collection seeks to map the landscape of contemporary informational interests, to evaluate a range of recognised and putative rights and wrongs associated with modern information societies, and to consider how law, regulation, and governance should be deployed in response. New technologies and new applications constantly disrupt our values, our framing of our world, and our sense of where we are and who we are. In our ‘information societies’, we entertain mixed hopes and expectations, as well as significant fears and concerns. At the root of these, there are a number of informational interests, on the basis of which certain rights are claimed and particular wrongs denounced. This book addresses these interests, considering them as relating primarily to the integrity of the informational ecosystem, to the accessibility, accuracy, and authenticity of public information, and to our individual ability to control the outward and inward flows of information that relates directly to ourselves. Covering a wide range of subjects, the book’s interrogation of our contemporary information society is oriented around two questions: first, whether the information society in which we live is the kind of society that we think it should be and, second, if not, what we can reasonably expect law, regulation, and governance to do in providing the basis for improving it. This book will be of considerable interest to those working at the intersection of law and technology, as well as others concerned with the legal, political, and social aspects of our information society.

This Introduction to Manufacturing focuses students on the issues that matter to practicing industrial engineers and managers. It offers a systems perspective on designing, managing, and improving manufacturing operations. On each topic, it covers the key issues, with pointers on where to dig deeper. Unlike the many textbooks on operations management, supply chain management, and process technology, this book weaves together these threads as they interact in manufacturing. It has five parts: Getting to Know Manufacturing: Fundamental concepts of manufacturing as an economic activity, from manufacturing strategy to forecasting market demand Engineering the Factory: Physical design of factories and processes, the necessary infrastructure and technology for manufacturing Making Information Flow: The "central nervous system" that triggers and responds to events occurring in production Making Materials Flow: The logistics of manufacturing, from materials handling inside the factory via warehousing to supply chain management Enhancing Performance: Managing manufacturing performance and methods to maintain and improve it, both in times of normal operations and emergencies Supported with rich illustrations and teaching aids, Introduction to Manufacturing is essential reading for industrial engineering and management students – of all ages and backgrounds – engaged in the vital task of making the things we all use.

This book explains the implementation of just in time (JIT) production in an industrial context, while also highlighting the application of various, vital lean production tools. Shifting the trade-off between productivity and quality, the book discusses the preparation stages needed before implementing a JIT system. After an introduction to lean manufacturing and JIT, it introduces readers to the fundamentals and practice of Kaizen, paying special attention to lean manufacturing tools. The book demonstrates how to use the 5S approach (with the stages of Seiri, Seiton, Seiso, Seiketsu and Shitsuke), Standardized Work, Single Minute Exchange of Die (SMED) and the Kanban system. In brief, the book provides an understanding of the processes associated with the application of these tools and highlights the benefits attained by companies that have implemented JIT systems. Throughout the book, a real-world case study is used to deepen readers’ understanding of how lean manufacturing tools can be implemented. The book is ideally suited for executive courses in industrial engineering and management, but can also be used for upper undergraduate and graduate courses at universities.

This book highlights the concepts of lean manufacturing that help to achieve the objectives of sustainability in a global competitive atmosphere. Lean can help to lower the manufacturing cost in the rising labour and material cost market. Lean is based on various fundamental concepts such as Kaizen, Kanban, Zidoka, 5S and Six Sigma, which aim at reducing process waste for efficiency and productivity that are discussed in this book. In addition, the technological changes such as introduction of Internet technologies and Industry 4.0 are taken care by the lean concepts, which are also addressed in this book.

“This excellent summary of an important part of NASA’s history is recommended for all readers.” —Choice In Faster, Better, Cheaper: Low-Cost Innovation in the U.S. Space Program, Howard E. McCurdy examines NASA’s recent efforts to save money while improving mission frequency and performance. McCurdy details sixteen missions undertaken as the twentieth century drew to a close—including an orbit of the moon, deployment of three space telescopes, four Earth-orbiting satellites, two rendezvous with comets and asteroids, and a test of an ion propulsion engine—which cost less than the sum traditionally spent on a single, conventionally planned planetary mission. He shows how these missions employed smaller spacecraft and cheaper technology to undertake less complex and more specific tasks in outer space. While the technological innovation and space exploration approach that McCurdy describes is still controversial, the historical perspective on its disappointments and triumphs points to ways of developing “faster, better, and cheaper” as a management manifesto. “Readers interested in either the management or economics of complex organizations will find a wealth of material in this well-written exposition. Fans of space travel, like the author himself, will also enjoy the behind-the-scenes look at NASA’s operation.” —Enterprise and Society

Since the 18th century, automation has driven progress in manufacturing, transforming the workplace and contributing to the massive increase in living standards enjoyed by most people in the developed world over this period. A robot is a specific example of automation technology, one that can perform a complex sequence of actions automatically without manual intervention. Originally confined to manufacturing, robotic technology is now entering many other areas of our lives, from our domestic appliances to medical devices, and recent developments in self-driving vehicles are bringing some of the most sophisticated examples of the technology onto our roads. The Story of the Robot examines the history of the robot within the wider context of automation, thereby allowing the reader to fully appreciate the origins and evolution of robotic systems. It begins by tracing the historical roots of robotics through the development of automata and mechanical toys. The next four chapters guide the reader on a whistle-stop tour across more than 300 years of automation history. Chapter 6 charts the rise of humanoid robots, beginning with their first appearance in science fiction stories to their physical realisation at the end of the 20th century. In Chapter 7, the use of autonomous control technology in mobility applications is surveyed, from the earliest self-steering vehicles to autonomous robots and self-driving cars. The final chapter brings the story up to date with the new industrial revolution now taking place as a result of the application of digitalisation and interconnectivity technologies to manufacturing. Each chapter contains a selection of carefully chosen images and includes a further reading list for those readers who wish to delve deeper into the technical details.

The advancement of technology, such as data analytics and AI, has led to the birth of Industry 4.0, in which technology seems to be at the centre of development. However, as the COVID-19 pandemic created havoc, the entire world production chain was seriously affected, highlighting that machines alone, although fully connected and automated, cannot function without people. This book addresses contemporary issues and the impact of digital transformation on individuals, businesses and governments in Asia. As Asian nations are moving fast towards the digital economy, this edited collection offers new perspectives on understanding emerging business opportunities as well as the challenges faced. Chapters explore the variables that accelerate digital transformation, notably the COVID-19 pandemic, the rapid development of information and communication technology, AI, big data and affordable internet access, and their impact on business and society. With rich, empirical studies from leading researchers, this book will be a reference for academics and scholars across business disciplines, including information, technology and innovation management, organisational and strategic management, as well as those interested in industrial development.

Dream Car tells the story of entrepreneur Malcolm Bricklin’s fantastical 1970s-era Safety Vehicle-1 (SV1), audaciously launched during a tumultuous breakpoint in postwar history. The tale of the sexy-yet-safe SV1 reveals the influence of automobiles on ideas about the future, technology, entrepreneurship, risk, safety, showmanship, politics, sex, gender, business, and the state, as well as the history of the auto industry’s birth, decline, and rebirth. Written as an “open road,” the book invites readers to travel a narrative arc that unfolds chronologically and thematically. Dream Car’s seven chapters have been structured so that they can be read in any order, determined by whichever theme each reader finds most interesting. The book also includes a musical playlist of car songs from the era and songs about the SV1 itself.