Microprocessor System Design: A Practical Introduction describes the concepts and techniques incorporated into the design of electronic circuits, particularly microprocessor boards and their peripherals. The book reviews the basic building blocks of the electronic systems composed of digital (logic levels, gate output circuitry) and analog components (resistors, capacitors, diodes, transistors). The text also describes operational amplifiers (op-amp) that use a negative feedback technique to improve the parameters of the op-amp. The design engineer can use programmable array logic (PAL) to replace standard discrete TTL and CMOS gates in circuits. The PAL is programmable and configurable to match the requirement of a given circuit. Using PAL can save space, a very important factor in the miniaturization process. Examples of PAL applications include the BCD counter, the LS 138 emulator, and a priority interrupt encoder. The book also explains the operation and function of a microprocessor, the bus-based systems, analog-to-digital conversion, and vice-versa. The text is suitable for programmers, computer engineers, computer technicians, and computer instructors dealing with many aspects of computers such as programming, networking, engineering or design.

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured. Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects. Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects. Explains soft, parameterized, and hard core systems design tradeoffs; Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step; Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized; Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system; Describes Compiler-Compiler Tool development; Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.

This book is intended for a first course on microprocessor-based systems design for engineering and computer science students. It starts with an introduction of the fundamental concepts, followed by a practical path that guides readers to developing a basic microprocessor example, using a step-by-step problem-solving approach. Then, a second microprocessor is presented, and readers are guided to the implementation and programming of microcomputer systems based on it. The numerous worked examples and solved exercises allow a better understanding and a more effective learning. All the examples and exercises were developed on Deeds (Digital Electronics Education and Design Suite), which is freely available online on a website developed and maintained by the authors. The discussed examples can be simulated by using Deeds and the solutions to all exercises and examples can be found on that website. Further, in the last part of this book, different microprocessor-based systems, which have been specifically thought for educational purposes, are extensively developed, simulated and implemented on FPGA-based platforms. This textbook draws on the authors’ extensive experience in teaching and developing learning materials for bachelor’s and master’s engineering courses. It can be used for self-study as well, and even independently from the simulator. Thanks to the learning-by-doing approach and the plentiful examples, no prior knowledge in computer programming is required.

The Rabbit 3000 is a popular high-performance microprocessor specifically designed for embedded control, communications, and Ethernet connectivity. This new technical reference book will help designers get the most out of the Rabbit's powerful feature set. The first book on the market to focus exclusively on the Rabbit 3000, it provides detailed coverage of: Rabbit architecture and development environment, interfacing to the external world, networking, Rabbit assembly language, multitasking, debugging, Dynamic C and much more! Authors Kamal Hyder and Bob Perrin are embedded engineers with years of experience and they offer a wealth of design details and "insider" tips and techniques. Extensive embedded design examples are supported by fully tested source code. Whether you're already working with the Rabbit or considering it for a future design, this is one reference you can't be without! Let the experts teach you how to design embedded systems that efficiently hook up to the Internet using networked core modules Provides a number of projects and source code using RabbitCore, which will make it easy for the system designer and programmer to get hands-on experience developing networked devices

System Design; Digital to Analog Converters; Sensors; Time-Based Measurements; Output Control Methods; Solenoids, Relays, and Other Analog Outputs; Motors; EMI; High Precision Applications; Standard Interfaces.

The less-experienced engineer will be able to apply Ball's advice to everyday projects and challenges immediately with amazing results. In this new edition, the author has expanded the section on debug to include avoiding common hardware, software and interrupt problems. Other new features include an expanded section on system integration and debug to address the capabilities of more recent emulators and debuggers, a section about combination microcontroller/PLD devices, and expanded information on industry standard embedded platforms. - Covers all 'species' of embedded system chips rather than specific hardware - Learn how to cope with 'real world' problems - Design embedded systems products that are reliable and work in real applications

The Engineering of Microprocessor Systems: Guidelines on System Development provides economical and technical guidance for use when incorporating microprocessors in products or production processes and assesses the alternatives that are available. This volume is part of Project 0251 undertaken by The Electrical Research Association, which aims to give managers and development engineers advice and comment on the development process and the hardware and software needed to support the engineering of microprocessor systems. The results of Phase 1 of the five-phase project are contained in this first volume. It presents an overview of the technology of microprocessors themselves, of the development process, and of the range of development aids which will be covered in greater depth in later volumes. Also included are specific recommendations, facts, or guidelines on the choices to be made or procedures to be adopted. This volume is aimed primarily at the manager or other users responsible for microprocessor system developments, but who may lack direct experience in this field. It is intended to provide a decision framework and background material for management considering such developments for the first time, so that the special problems and key aspects of a microprocessor based development can be identified from the start.

Debugging Embedded Microprocessor Systems provides techniques for engineers, technicians, and students who need to correct design faults in embedded systems. Using real-world scenarios, designers can learn practical, time-saving ways to avoid and repair potentially costly problems. Prevention is stressed. In this book, the author addresses hardware and software issues, including up-front design techniques to prevent bugs and contain design creep. Practical advice includes descriptions of common tools which can be used to help identify and repair bugs, as well as test routines. RTOS and embedded PC environments are also covered. Each chapter of Debugging Embedded Microprocessor Systems opens with an example design problem which illustrates real-world issues such as design changes, time pressures, equipment or component availability, etc. Case studies of past debugging projects are presented in the final chapter. - Addresses real-world issues like design changes, time pressures, equipment or component availability - Practical, time-saving methods for preventing and correcting design problems - Covers debugging tools and programmer test routines