This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.

This volume is a collection of twenty five written contributions by distinguished invited speakers from seven countries to the IUTAM Symposium on Size Effects on Material and Structural Behavior at Micron- and Nano-scales. Size effects on material and structural behaviors are of great interest to physicists, material scientists, and engineers who need to understand and model the mechanical behavior of solids especially at micron- and nano-scales.

What can be added to the fracture mechanics of metal fatigue that has not already been said since the 1900s? From the view point of the material and structure engineer, there are many aspects of failure by fatigue that are in need of attention, particularly when the size and time of the working components are changed by orders of magnitude from those considered by st traditional means. The 21 century marks an era of technology transition where structures are made larger and devices are made smaller, rendering the method of destructive testing unpractical. While health monitoring entered the field of science and engineering, the practitioners are discovering that the correlation between the signal and the location of interest depends on a priori knowledge of where failure may initiate. This information is not easy to find because the integrity of the physical system will change with time. Required is software that can self-adjust in time according to the monitored data. In this connection, effective application of health monitoring can use a predictive model of fatigue crack growth. Earlier fatigue crack growth models assumed functional dependence on the maximum stress and the size of the pre-existing crack or defect. Various possibilities were examined in the hope that the data could be grouped such that linear interpolation would apply.

Fundamentals of Multiscale Modeling of Structural Materials provides a robust introduction to the computational tools, underlying theory, practical applications, and governing physical phenomena necessary to simulate and understand a wide-range of structural materials at multiple time and length scales. The book offers practical guidelines for modeling common structural materials with well-established techniques, outlining detailed modeling approaches for calculating and analyzing mechanical, thermal and transport properties of various structural materials such as metals, cement/concrete, polymers, composites, wood, thin films, and more.Computational approaches based on artificial intelligence and machine learning methods as complementary tools to the physics-based multiscale techniques are discussed as are modeling techniques for additively manufactured structural materials. Special attention is paid to how these methods can be used to develop the next generation of sustainable, resilient and environmentally-friendly structural materials, with a specific emphasis on bridging the atomistic and continuum modeling scales for these materials. - Synthesizes the latest cutting-edge computational multiscale modeling techniques for an array of structural materials - Emphasizes the foundations of the field and offers practical guidelines for modeling material systems with well-established techniques - Covers methods for calculating and analyzing mechanical, thermal and transport properties of various structural materials such as metals, cement/concrete, polymers, composites, wood, and more - Highlights underlying theory, emerging areas, future directions and various applications of the modeling methods covered - Discusses the integration of multiscale modeling and artificial intelligence

Thematerialsusedinmanufacturingtheaerospace,aircraft,automobile,andnuclear parts have inherent aws that may grow under uctuating load environments during the operational phase of the structural hardware. The design philosophy, material selection, analysis approach, testing, quality control, inspection, and manufacturing are key elements that can contribute to failure prevention and assure a trouble-free structure. To have a robust structure, it must be designed to withstand the envir- mental load throughout its service life, even when the structure has pre-existing aws or when a part of the structure has already failed. If the design philosophy of the structure is based on the fail-safe requirements, or multiple load path design, partial failure of a structural component due to crack propagation is localized and safely contained or arrested. For that reason, proper inspection technique must be scheduled for reusable parts to detect the amount and rate of crack growth, and the possible need for repairing or replacement of the part. An example of a fail-sa- designed structure with crack-arrest feature, common to all aircraft structural parts, is the skin-stiffened design con guration. However, in other cases, the design p- losophy has safe-life or single load path feature, where analysts must demonstrate that parts have adequate life during their service operation and the possibility of catastrophic failure is remote. For example, all pressurized vessels that have single load path feature are classi ed as high-risk parts. During their service operation, these tanks may develop cracks, which will grow gradually in a stable manner.

The book presents 81 papers referring to the properties and applications of technologically important materials. Topics covered include material characterization, environmental impact, probabilistic assessment, failure analysis, vibration analysis, AI-based predictions, conceptual models, thermo-mechanical properties, numerical models, design and simulation, industrial performance and failure analysis. Keywords: Laminated Sandwich Shell, Polymer Nanocomposite, Cellular Glass Foam, Porous Spherical Shells, Cracks Between Dissimilar Materials, Soil Stabilization, Dynamic Strain Aging, Composite Plates, Recycled Concrete Aggregates, Preparation & Characterization of Nanoparticles, Auxetic Materials, Biomechanical Model, Cellular Lightweight Concrete, Thermoplastic Materials, Powder Metal Gears, Fibre Reinforced Concrete, Adhesively Bonded Composites, Solar PV Power, Kirigami Folded Structures, Steel Fibres, Solar Panels, Electric Discharge Machining, Energy Harvesting, Energy Conversion, Glass/Epoxy Pipe, Manufacturing Strategy, Additive Manufacturing, Fibre-Reinforced Aluminum, Telescopic Paraboloidal Solar Concentrator, Energy Storage, Machining Waste Fibers, Numerical Simulation, Foam Concrete, Heat Exchangers, Nanofluids, Spherical Cavity Explosion, Cross-Ply Structure, Reinforced Concrete Walls, Artificial Intelligence, l-shaped Metamaterials, Sand-Bentonite Liners, Layered Composite Arches, Stitched Sandwich Structures, Semilinear Hyperelastic Solids, Filament Fabrication, Polyethylene Bottles, Spherical Shells, Steel Boiler Tub, Mortars, 3D Printing, Electromagnetic Forming.

ICSSD 2002 is the second in the series of International Conferences on Structural Stability and Dynamics, which provides a forum for the exchange of ideas and experiences in structural stability and dynamics among academics, engineers, scientists and applied mathematicians. Held in the modern and vibrant city of Singapore, ICSSD 2002 provides a peep at the areas which experts on structural stability and dynamics will be occupied with in the near future. From the technical sessions, it is evident that well-known structural stability and dynamic theories and the computational tools have evolved to an even more advanced stage. Many delegates from diverse lands have contributed to the ICSSD 2002 proceedings, along with the participation of colleagues from the First Asian Workshop on Meshfree Methods and the International Workshop on Recent Advances in Experiments and Computations on Modeling of Heterogeneous Systems. Forming a valuable source for future reference, the proceedings contain 153 papers OCo including 3 keynote papers and 23 invited papers OCo contributed by authors from all over the world who are working in advanced multi-disciplinary areas of research in engineering. All these papers are peer-reviewed, with excellent quality, and cover the topics of structural stability, structural dynamics, computational methods, wave propagation, nonlinear analysis, failure analysis, inverse problems, non-destructive evaluation, smart materials and structures, vibration control and seismic responses.The major features of the book are summarized as follows: a total of 153 papers are included with many of them presenting fresh ideas and new areas of research; all papers have been peer-reviewed and are grouped into sections for easy reference; wide coverage of research areas is provided and yet there is good linkage with the central topic of structural stability and dynamics; the methods discussed include those that are theoretical, analytical, computational, artificial, evolutional and experimental; the applications range from civil to mechanical to geo-mechanical engineering, and even to bioengineering."

This book provides an overview of multiscale approaches and homogenization procedures as well as damage evaluation and crack initiation, and addresses recent advances in the analysis and discretization of heterogeneous materials. It also highlights the state of the art in this research area with respect to different computational methods, software development and applications to engineering structures. The first part focuses on defects in composite materials including their numerical and experimental investigations; elastic as well as elastoplastic constitutive models are considered, where the modeling has been performed at macro- and micro levels. The second part is devoted to novel computational schemes applied on different scales and discusses the validation of numerical results. The third part discusses gradient enhanced modeling, in particular quasi-brittle and ductile damage, using the gradient enhanced approach. The final part addresses thermoplasticity, solid-liquid mixtures and ferroelectric models. The contents are based on the international workshop “Multiscale Modeling of Heterogeneous Structures” (MUMO 2016), held in Dubrovnik, Croatia in September 2016.

With the recent developments in the field of advanced materials, there exists a need for a systematic summary and detailed introduction of the modeling and simulation methods for these materials. This book provides a comprehensive description of the mechanical behavior of advanced materials using modeling and simulation. It includes materials such as high-entropy alloys, high-entropy amorphous alloys, nickel-based superalloys, light alloys, electrode materials, and nanostructured reinforced composites. Reviews the performance and application of a variety of advanced materials and provides the detailed theoretical modeling and simulation of mechanical properties Covers the topics of deformation, fracture, diffusion, and fatigue Features worked examples and exercises that help readers test their understanding This book is aimed at researchers and advanced students in solid mechanics, material science, engineering, material chemistry, and those studying the mechanics of materials.