The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.

The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.

The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.

The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Incorporating Sustainable Practice in Mechanics of Structures and Materials is a collection of peer-reviewed papers presented at the 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21, Victoria, University, Melbourne, Australia, 7th 10th of December 2010). The contributions from academics, researchers and practisin

The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.

The fib Awards for Outstanding Concrete Structures are attributed every four years at the fib Congress, with the goal of enhancing the international recognition of concrete structures that demonstrate the versatility of concrete as a structural medium. The award consists of a bronze plaque to be displayed on the structure, and certificates presented to the main parties responsible for the work. Applications are invited by the fib secretariat via the National Member Groups. Information on the competition is also made available on the fib’s website, and in the newsletter fib-news published in Structural Concrete. The submitted structures must have been completed during the four years prior to the year of the Congress at which the awards are attributed. The jury may accept an older structure, completed one or two years before, provided that it was not already submitted for the previous award attribution (Mumbai, 2014). The submitted structures must also have the support of an fib Head of Delegation or National Member Group Secretary in order to confirm the authenticity of the indicated authors. Entries consist of the completed entry form, three to five representative photos of the whole structure and/or any important details or plans, and short summary texts explaining: - the history of the project; - description of the structure; - particularities of its realisation (difficulties encountered, special solutions found, etc.). A jury designated by the Presidium selects the winners. The awards are attributed in two categories, Civil Engineering Structures (including bridges) and Buildings. Two or three ‘Winners’ and two to four ‘Special Mention’ recipients are selected in each category, depending on the number of entries received. The jury takes into account criteria such as: - design aspects, including aesthetics and design detailing; - construction practice and quality of work; - environmental aspects of the design and its construction; - durability and sustainability aspects; - significance of the contribution made by the entry to the development and improvement of concrete construction. The decisions of the jury are definitive and cannot be challenged. They are unveiled at a special ceremony during the fib Congress in Melbourne.

The FRC-2014 Workshop Fibre Reinforced Concrete: from Design to Structural Applications was the first ACI-fib joint technical event. The Workshop, held at Polytechnique Montreal (Canada) on July 24th and 25th 2014, was attended by 116 participants from 25 countries and 4 continents. The first international FRC workshop was held in Bergamo (Italy) in 2004. At that time, the lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. Ten years after Bergamo, many of the objectives identified at that time have been achieved. The use of fibre reinforced concrete (FRC) for designing structural members in bending and shear has recently been addressed in the fib Model Code 2010. Steel fibre reinforced concrete (SFRC) has also been used structurally in several building and bridge projects in Europe and North-America. SFRC has been widely used in segmental tunnel linings all over the world. Members of ACI544 and fib TG-4.1 have been involved in writing code based specifications for the design of FRC structural members. More than fifty papers were presented at the Workshop from which forty-four were selected for this joint ACI/fib publication. The papers are organised in the document under six themes: Design guidelines and specifications, Material properties for design, Behaviour and design of beams and columns, Behaviour and design of slabs and other structures, Behaviour and design of foundations and underground components, and finally, Applications in structure and underground construction projects.