The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.

The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.

This the fifth volume of five from the 28th IMAC on Structural Dynamics and Renewable Energy, 2010,, brings together 146 chapters on Structural Dynamics. It presents early findings from experimental and computational investigations of on a wide range of area within Structural Dynamics, including studies such as Simulation and Validation of ODS Measurements made Using a Continuous SLDV Method on a Beam Excited by a Pseudo Random Signal, Comparison of Image Based, Laser, and Accelerometer Measurements, Modal Parameter Estimation Using Acoustic Modal Analysis, Mitigation of Vortex-induced Vibrations in Long-span Bridges, and Vibration and Acoustic Analysis of Brake Pads for Quality Control.

The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

This new edition sets out the fundamental aspects of concrete durability with an emphasis on sustainability and carbon neutrality through performance-based methodologies. Global approaches to managing durability are explained from both a prescriptive and performance viewpoint. Achieving a balance between the interactive factors influencing durability and sustainability is supported by an explanation of the physical and chemical phenomena at play, determination of key performance parameters by mathematical modelling and physical testing, and current guidance for good practice. New chapters and sections examine the holistic approach to durability and significant aspects of traditional and new cementitious systems. The full range of threats to durability are covered in this single volume, including reinforcement corrosion, carbonation, chloride ingress, freeze-thaw effects, sulfate attack, acid and seawater attack, alkali-aggregate reaction, cracking, abrasion, erosion, cavitation, and weathering. The book presents a framework for specification through internationally adopted codes and standards and summarises the background to probabilistic approaches to durability design, providing a state-of-the-art review of mathematical modelling of deterioration mechanisms along with current directions in test methods for performance-based specifications. Fundamentals of Durable Reinforced Concrete is an essential reference on concrete durability for specifiers and researchers and is also accessible to undergraduate students.

The 5th International Conference on Civil Engineering and Urban Planning (CEUP2016) was held in Xi'an, China on August 23 - 26, 2016. CEUP2016 gathered outstanding scientists and researchers worldwide to exchange and discuss new findings in civil engineering and urban planning associated with transportation and environmental topics. The conference program committee is also greatly honored to have four renowned experts for taking time off to present their keynotes to the conference.The conference had received a total of 410 submissions, which after peer review by the Technical Program Committee, only 108 were selected to be included in this conference proceedings, which covers Architecture and Urban Planning; Civil Engineering and Transportation Engineering.

Seismic design of structures is fast turning to performance-based design (PBD) from old codal force-based design (FBD) method. The aim of the book is to expose readers to the meaning and need of PBD, the evolution of PBD to date, its various forms and applications. Various design philosophies and procedures have been described including modelling aspects and hazard considerations backed by examples. Direct displacement-based design (DDBD) and Unified PBD (UPBD) of reinforced concrete (RC) frame buildings, RC dual systems, steel frame buildings and bridge piers have also been explained. The main features of this book are as follows: • Illustrates performance-based seismic design to achieve the design target by performance objective-oriented design procedure. • Covers modern design philosophies, modelling aspects, concepts in nonlinearities and use of supplemental damping devices. • Contains a chapter on seismic safety of nonstructural components. • Describes UPBD design procedure and examples of different structural systems. • Includes application and examples with reference to SAP2000 software. This book is aimed at graduate students, researchers and professionals in civil engineering, earthquake engineering and structural design.

Corrosion of Steel in Concrete provides information on corrosion of steel in atmospherically exposed concrete structures and serves as a guide for those designing, constructing and maintaining buildings, bridges and all reinforced concrete structures. This new edition incorporates the new European standards as well as USA and other international standards. It also covers developments in galvanic and impressed current cathodic protection, new electrochemical techniques such as electro-osmosis, and stainless steel clad reinforcing bars. The corrosion of reinforcing steel in concrete is a major problem facing civil engineers and surveyors throughout the world today. There will always be a need to build structures in corrosive environments and it is therefore essential to address the problems that result. This is a book to educates about and forms a guide to the problems of corrosion, its causes and how to find solutions.