Virtual Modelling and Rapid Manufacturing presents essential research in the area of Virtual and Rapid Prototyping. It contains reviewed papers that were presented at the 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, held at the School of Technology and Management of the Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2005. The volume covers a wide range of topical subjects, such as medical imaging, reverse engineering, virtual reality and prototyping, biomanufacturing and tissue engineering, advanced rapid prototyping technologies and micro-fabrication, biomimetics and materials, and concurrent engineering

Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key

Additive Manufacturing, Modeling Systems and 3D Prototyping Proceedings of the 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022), July 24–28, 2022, New York, USA

This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.

The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.

Embark on a journey through the intricate landscape of additive manufacturing with ‘Additive Manufacturing & Design’, a seminal work tailored for readers, researchers, and industrial professionals alike. Authored by leading experts in the field, this meticulously crafted volume delves into the core principles, methodologies, and advanced techniques that underpin additive manufacturing processes. From material selection and design optimization to post-processing and quality control, each chapter elucidates crucial aspects essential for mastering the intricacies of additive manufacturing. Through comprehensive case studies and real-world examples, readers gain invaluable insights into leveraging additive manufacturing technologies across diverse industries, revolutionizing production paradigms and fostering innovation. Whether you’re delving into research, seeking practical guidance for industrial implementation, or simply exploring the forefront of technological advancement, ‘Additive Manufacturing & Design’ serves as an indispensable resource, illuminating the path towards unlocking the full potential of additive manufacturing in the modern era.

This book introduces the role of Rapid Prototyping Techniques within the product development phase. It deals with the concept, origin, and working cycle of Rapid Prototyping Processes with emphasis on the applications. Apart from elaboration of engineering and non-engineering applications, it highlights recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models. Special emphasis has been provided to the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence the book also elaborates on the mass manufacturing of rapid prototyped products. This includes casting and rapid tooling. The book concludes with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. With globalization of market and advances in science and technology, the life span of products has shortened considerably. For early realization of products and short development period, engineers and researchers are constantly working together for more and more efficient and effective solutions. The most effective solution identified has been usage of computers in both designing and manufacturing. This gave birth to the nomenclatures CAD (Computer Aided Designing) and CAM (Computer aided Manufacturing). This was the initiation that ensured short product development and realization period. Researchers coined the concept as Rapid Prototyping. In contrast to Prototyping, Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive or subtractive layer manufacturing" technology. The first methods for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus for early product realization or physical products for actual testing. This book is expected to contain Seven Chapters. Chapter 1 would explain product life cycle and the product development phase in the same, introducing role of Rapid Prototyping Techniques in Product development phase. Chapter 2 would deals with the concept, origin and working cycle of Rapid Prototyping Processes. Chapter 3 would concentrates on the applications of Rapid Prototyping Technology. Apart from elaboration of engineering and non-engineering applications, it also elaborates on recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models etc. Chapter 4 would introduce the various Rapid Prototyping systems available worldwide. The chapter also introduces the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS hence ensuring low rejection rate by human body. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence Chapter 5 would elaborates on the mass manufacturing of rapid prototyped products. This includes Casting and Rapid Tooling. Chapter 6 would deal with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. As the product realization is primarily dependent on various softwares which are required to be understood for better accuracy so the concluding chapter of the book i.e. Chapter 7 would explain some software associated with the various techniques.

High Value Manufacturing is the result of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal, October 2013. It contains current contributions to the field of virtual and rapid prototyping (V&RP) and is also focused on promoting better links between industry and academia. This volume

Innovative Developments in Virtual and Physical Prototyping presents essential research in the area of Virtual and Rapid Prototyping. The volume contains reviewed papers presented at the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, hosted by the Centre for Rapid and Sustainable Product Development of the Polyt

Technological advancements are contributing to shape future business models and the industrial scenario. Companies face the challenge of having to adapt to the frequently shifting technology landscape. Therefore, organizations must exploit technological advances to thrive in the digital revolution. This book presents and discusses emerging digital business models in the Industry 4.0. These models are illustrated with real case studies and include data-driven, platform, smart factory and servitization among others. The book introduces a detailed classification to help organizations to redesign their current business models and discusses how to gain unique competitive advantages. The book includes not only theoretical concepts to understand the context of digital transformation but also an assessment framework to enable and support innovation in organizations and create new revenue streams. The book will be of interest to students and professionals alike who want to understand the core of the Industry 4.0.