TQM, Reengineering,Theory of Constraints, JIT,Six Sigma, Lean Manufacturing . . . These are just some of the methods that, overthe past five decades, have promised to transformany manufacturing firm into a lean, mean, moneymakingmachine. While each incorporates certainfundamental truths, strengths, and benefits, theyare not panaceas. Nor do they necessarily providemuch-needed insight into the science that underliesfactory performance. James Ignizio, Ph.D., an internationally recognizedperformance optimization expert, believesthat only a balanced approach will provide thesignificant and sustainable improvement requiredof firms who will survive and prosper in thetwenty-first century. In this breakthrough guide, Dr. Ignizio picks upwhere such concepts as Six Sigma and Lean Manufacturingleave off to provide you with a holistic,three-dimensional approach to mastering the artand science of manufacturing. Focusing on the three primary enemiesof factory performance—complexity, variability,and lackluster leadership—Optimizing FactoryPerformance cuts to the heart of the problem ofless-than-world-class performance and demonstrateshow those enemies manifest themselves incompanies across manufacturing sectors. Ignizioalso explores the insidious effect company politicsand flagging commitment to manufacturing performancehave on competitiveness. Emphasizing the all-important, often overlookedthird dimension of manufacturing—factoryprotocols—Ignizio describes the types of strategicand tactical changes to physical plant and operatingprocedures any company can make to achieveperformance improvements. In addition, he arms youwith powerful, original metrics for measuring andcomparing factory performance, as well as a set ofinteractive simulation models, available online atwww.mhprofessional.com/ignizio. Running throughout the book is an oftenamusing, always instructive account of the fictionalhigh-tech firm, Muddle, Inc., which helps supportthe concepts discussed in the real world of manufacturing,while reinforcing key lessons learned. Read Optimizing Factory Performance and findout how to transform your organization into the kindof fast, agile manufacturer that delivers the rightproducts to the right customers at the right time—every time.

The industrial revolution, mechanization, water and steam power, computers, and automation have given an enormous boost to manufacturing productivity. "Faster, Better, Cheaper" in the History of Manufacturing shows how the ability to make products faster, better, and cheaper has evolved from the stone age to modern times. It explains how different developments over time have raised efficiency and allowed the production of more and better products with less effort and materials, and hence faster, better, and cheaper. In addition, it describes the stories of inventors, entrepreneurs, and industrialists and looks at the intersection between technology, society, machines, materials, management, and – most of all – humans. "Faster, Better, Cheaper" in the History of Manufacturing follows this development throughout the ages. This book covers not only the technical aspects (mechanization, power sources, new materials, interchangeable parts, electricity, automation), but organizational innovations (division of labor, Fordism, Talyorism, Lean). Most of all, it is a story of the people that invented, manufactured, and marketed the products. The book shows how different developments over time raised efficiency and allowed production of more with less effort and materials, which brought us a large part of the wealth and prosperity we enjoy today. The stories of real inventors and industrialists are told, which includes not only their successes but also their problems and failures. The effect of good or bad management on manufacturing is a recurring theme in many chapters, as is the fight for intellectual property through thrilling tales of espionage. This is a story of successes and failures. It is not only about technology but also about social aspects. Ultimately, it is not a book about machines but about people!

The two volumes IFIP AICT 459 and 460 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2015, held in Tokyo, Japan, in September 2015. The 163 revised full papers were carefully reviewed and selected from 185 submissions. They are organized in the following topical sections: collaborative networks; globalization and production management; knowledge based production management; project management, engineering management, and quality management; sustainability and production management; co-creating sustainable business processes and ecosystems; open cloud computing architecture for smart manufacturing and cyber physical production systems; the practitioner's view on "innovative production management towards sustainable growth"; the role of additive manufacturing in value chain reconfiguration and sustainability; operations management in engineer-to-order manufacturing; lean production; sustainable system design for green products; cloud-based manufacturing; ontology-aided production - towards open and knowledge-driven planning and control; product-service lifecycle management: knowledge-driven innovation and social implications; and service engineering.

The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.

This book constitutes the refereed proceedings of the 7th European Lean Educator Conference ELEC 2021, hosted in Trondheim, Norway, in October 2021 and sponsored by IFIP WG 5.7. The conference was held virtually. The 42 full papers presented were carefully reviewed and selected from 82 submissions. They are organized in the following thematic sections: Learning Lean; Teaching Lean in the Digital Era; Lean and Digital; Lean 4.0; Lean Management; Lean Coaching and Mentoring; Skills and Knowledge Management; Productivity and Performance Improvement; New Perspectives of Lean.

Whole System Design is increasingly being seen as one of the most cost-effective ways to both increase the productivity and reduce the negative environmental impacts of an engineered system. A focus on design is critical, as the output from this stage of the project locks in most of the economic and environmental performance of the designed system throughout its life, which can span from a few years to many decades. Indeed, it is now widely acknowledged that all designers - particularly engineers, architects and industrial designers - need to be able to understand and implement a whole system design approach. This book provides a clear design methodology, based on leading efforts in the field, and is supported by worked examples that demonstrate how advances in energy, materials and water productivity can be achieved through applying an integrated approach to sustainable engineering. Chapters 1-5 outline the approach and explain how it can be implemented to enhance the established Systems Engineering framework. Chapters 6-10 demonstrate, through detailed worked examples, the application of the approach to industrial pumping systems, passenger vehicles, electronics and computer systems, temperature control of buildings, and domestic water systems. Published with The Natural Edge Project, the World Federation of Engineering Organizations, UNESCO and the Australian Government.

The world of manufacturing is undergoing significant changes driven by various factors and technological advancements. Automation and robotics technologies are revolutionizing manufacturing processes. Robotic systems are being increasingly used for repetitive and precise tasks, improving efficiency, quality, and safety. The Internet of Things (IoT) is enabling connectivity and data exchange between devices and systems. Manufacturing generates vast amounts of data and is leveraging this data through advanced analytics, providing valuable insights to optimize production processes, predict maintenance needs, and improve supply chain management. Additive Manufacturing has also gained significant traction in manufacturing. It enables the creation of complex parts and prototypes, customization, and rapid prototyping. Supply chains are becoming more interconnected and digitally integrated. Technologies such as blockchain enable transparent and secure transactions, traceability, and efficient inventory management. These trends and others are reshaping the manufacturing industry, promoting increased efficiency, agility, and sustainability. Manufacturers must be aware, understand, and embrace these changes to stay competitive and meet the evolving demands of customers in the modern era. This book enhances the awareness and understanding of these core technologies by explaining what they are and how they are being used in manufacturing. In addition, it provides practical suggestions on how to advance manufacturing in light of these changes. The book provides a view into the future and direction on how to navigate the journey to a more automated, smarter, and continuously learning factory. This book consolidates the major elements of the fourth industrial revolution and describes them in clear terms within the context of integrated manufacturing. It creates awareness and a fundamental understanding of the advanced technologies that are coming together to facilitate highly automated, smarter, agile, and sustainable operations.

The two volumes IFIP AICT 414 and 415 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2013, held in University Park, PA, USA, in September 2013. The 133 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 4 parts: sustainable production, sustainable supply chains, sustainable services, and ICT and emerging technologies.

The urgent need to keep pace with the accelerating globalization of manufacturing in the 21st century has produced rapid advances in manufacturing research, development and innovation. This book presents the proceedings of the 15th International Conference on Manufacturing Research (ICMR 2017), which also incorporated the 32nd National Conference on Manufacturing Research (NCMR) and was held at the University of Greenwich, London, UK, in September 2017. The conference brings together a broad community of researchers who share the common goal of developing and managing the technologies and operations key to sustaining the success of manufacturing businesses. The book is divided into 13 parts, covering topics such as advanced manufacturing technologies (including additive, ultra-precision and nano-manufacturing); manufacturing systems (digital and cyber-physical systems); product design and development (including lifecycle management and supply-chain collaboration); information and communication (including innovation and knowledge management); and manufacturing management (including lean, sustainable and cost engineering). With its comprehensive overview of current developments, this book will be of interest to all those involved in manufacturing today.

This book covers topics related to implementation of advanced technologies, such as AI, big data, procurement 4.0, Logistics 4.0 and Lean 4.0, in Industry 4.0 for the manufacturing supply chain. Many applications of Industry 4.0 in the manufacturing supply chain have been presented. The content of this book is useful for students, researchers and professionals in order to implement Industry 4.0 in manufacturing supply chain.